Washing – Drying machines for full bottles, rinsing and air-blowing machines, bottling equipment

 

 back

Bottle drying assembly mod. A20

 

The bottle drying assembly mod. A20 is a ready-to-install compact tool for removing water drops and humidity from bottles and jars, after filling or pastorizing operations.

The drying assembly is mainly including 2 linear blowers, installed at the sides of a conveyor section. The air to the blowers is supplied by a high-pressure fan.
A plexiglass chamber is surrounding the blowers, to achieve a much higher temperature inside the tunnel than the room temperature.
The round containers are forced to rotate by a simple mechanical device, thus to remove efficiently all the water drops from the whole surface of the bottles.

The tunnel is designed to be installed in small bottling and food lines, with output up to 2000 bottles/hour.

Technical specifications:

Output Up to 2000 b/h.
n.b.: the proper drying result is depending from the actual speed of the conveyor chain
Max bottle size ø max 108 mm.
Conveyor section Standard S/S conveyor 100 x H.100mm – chain not included
Floor supports Plastic feet with threaded shaft, height adjustable  +/- 80 mm
Standard conveyor height 1000 mm
Standard voltage 380v – threephases – 50hz
Installed power 5,5 kw
Dimensions 150 x 70 x h.50 cm (height up conveyor level)

 back

Italiano  English  Francais